• Home
  • »
  • DIY - How to Replace a Hub Bearing

DIY - How to Replace a Hub Bearing

Enter the YEAR, MAKE & MODEL to see if the parts fit your vehicle
Select your vehicle


How To Replace A Hub Bearing

How To Replace A Hub Bearing

  • • Before you begin, always make sure you're vehicle is safely suspended on jack stands.
  • • Remove the tire from the vehicle.
  • • Remove the two bolts that mount the caliper to the Hub Bearing Assembly.
  • • Although we did not do it in this video, always have your caliper supported. Do not put undue pressure on the brake hose.
  • • Right now we are taking off the axle nut. If you are not using air tools, this should be done while the car is on the ground with the wheels blocked.
  • • Remove the three mounting bolts for the hub bearing. You can access them from the back.
  • • At this point, if you are at home you will need to use a hammer to get the hub bearing to start to move. Sometimes they are quite tight.
  • • The surfaces here need to be cleaned make reassembly nice and easy and also to give the hub bearing a nice surface to mount to.
  • • Use wheel bearing grease to help slow down corrosion and make reassembly easier.
  • • At this point, put the three bolts back in. Make sure you hand-tighten them at least three rotations before you tighten them completely.
  • • Put the axle nut back on. It needs to be torqued to proper specifications in order to prevent premature wear of the hub bearing. If you are not using air tools, this step need to be completed at the end with a torque wrench while the vehicle is on the ground with the wheels blocked.
  • • Put the rotor back onto the hub bearing assembly. You may find it easier to put a nut on to hold it in place while you're doing your other work.
  • • Remount the caliper bracket.
  • • Tighten these bolts by hand first. Afterward, make sure to tighten them down to proper specification.
  • • Put the rest of the brake assembly back together.
  • • When tightening the wheel, go in a star pattern. This will ensure that equal pressure is placed on the rotor.
  • • Always double-check your work, and after any repair make sure to test drive your vehicle.
  • WARNING: Do not attempt any automotive repairs without having proper experience or without consulting a licensed technician.